Ordering Instructions for Domestic CustomersCustomer InquiriesGeneral customer inquiries for information or clarifications about the NIST calibration services should be directed as follows:
Prearrangements and SchedulingServices should be arranged in advance, beginning with direct contact with a NIST technical staff member responsible for the desired service. Use the appropriate technical section of the to determine whom to contact. This advance communication may answer your questions, clarify the policies and procedures briefly described here, and will permit you to schedule a tentative calibration date. Following the initial communication, you must complete and send in a purchase order and prepare to ship the item according to the procedures described below or agreed upon with the technical contact. If a calibration is scheduled far in advance, the item should not be shipped until shortly before the scheduled date; you must submit the purchase order (complete with the name and service identification number of the desired service) before a firm calibration date can be assigned. When NIST receives your purchase order and assigns a firm service date, your order will be confirmed by the technical contact. Purchase OrdersBefore you ship an item for calibration, send a purchase order to the address listed in the appropriate technical section. The purchase order must: 1. State both the name and number of the NIST service ("Service ID Number") being requested. FAILURE TO INCLUDE THE SERVICE ORDER NUMBER WILL SERIOUSLY IMPEDE SCHEDULING AND SERVICE. 2. Clearly identify the item(s) being sent for calibration, including any serial number(s) or model number(s). 3. Give the name, address, and telephone number of your company's procurement officer, purchasing agent or other administrative/financial authority. 4. Give the name, address, and telephone number of your company's technical contact, if different from above. 5. List separately the instructions and address for return shipment, insurance, mailing address for the calibration/test report, and billing address. (Federal or state agency requests for calibration services should be accompanied by a document authorizing that the cost of the service be billed to the agency.) 6. Clearly state any special or necessary conditions of test, such as operating frequency or temperature. 7. Clearly state the customer identification number; i.e., social security number (EIN) for individuals; tax identification number (TIN) for organizations; or agency location code (ALC) for government customers. 8. If the calibration or test report is to be handled in a special manner, give instructions on the purchase order. NOTE: Receipt of orders by NIST does not imply acceptance of any provisions set forth in the order that are contrary to the policy, practice, or regulations of NIST or the U.S. Government. In general, NIST will not sign any affidavits, acknowledgment forms, or other documents that may be required by company policy governing the procurement of goods and services. Shipping, Insurance, and Risk of LossShip the instrument or standard to the mailing address of the technical group providing the service. Please take note that the mailing address is not the same for every technical group. Please adhere rigorously to the following procedures: 1. Ship only items in good repair. Apparatus in disrepair will not be calibrated. If defects are found after calibration has begun, the procedure will be terminated, a report issued, and a charge levied for work completed. 2. Use strong, reusable packing materials and containers marked clearly and indelibly on the outside with the requestor's name, address and the following notation: REUSABLE CONTAINER, DO NOT DESTROY. 3. Follow any special shipping procedures given in the technical sections, particularly those sections covering radiation and dosimetry measurements. 4. Insure the shipments to and from NIST and clearly state the method of return shipment. NIST will not assume liability for loss or damage unless such loss and damage result solely from the negligence of NIST personnel. If return shipment by parcel post is requested or is suitable, NIST will prepay the return shipment but will not insure it. When no shipping or insurance instructions are furnished, NIST will return the shipment by common carrier, collect and uninsured. 5. Shipments to NIST must be at FOB destinations. (Customer pays for shipping.) 6. Return shipments are sent FOB origin. (Customer pays for shipping.) NOTE: Fees for NIST services do not include shipping costs or insurance.Turnaround TimeNormal turnaround time for NIST calibration services varies greatly -- usually from several weeks to several months depending on the type of service requested, and the service schedule. Some services are only scheduled once or twice a year with appointments made months in advance of the service date. To avoid unnecessary scheduling or administrative delays in the calibration process, always make arrangements with the technical contact for the service you wish to utilize prior to shipping your instrument or artifact to NIST. Customer ChecklistsThese Customer Checklists are intended to assist you in developing the basic information required to process an order for calibration services at NIST. Customer Checklists for Ordering NIST Calibration Services
Calibration Services, NIST,
100 Bureau Drive, Stop 2330, Gaithersburg, MD 20899-2330 Date
created: 06/30/1999 |
||||||||||||||||||||||||||||||||||||||||||||||