United States Senate
 GO
United States Senate Senators HomeCommittees HomeLegislation & Records HomeArt & History HomeVisitor Center HomeReference Home
United States Senate
People
Origins & Development
Historical Minutes
Exhibits
Special Collections Highlights
Paintings
Sculpture
Graphic Arts
Oral History


  
 
 
   
 Mountains and Clouds 
Mountains and Clouds
by Alexander Calder (1898 - 1976) 
Painted aluminum and steel, Designed 1976, Completed 1986
Overall measurement
      Height: 612 inches  (1554.5 cm)
      Width:  900 inches  (2286 cm)
Unsigned
Cat. no. 25.00007.000
 
 
 
More on Mountains and Clouds
 
 

The dazzling new Hart Senate Office Building, first occupied in 1982 and named for Michigan Senator Philip A. Hart, broke with tradition. Unlike its predecessors, the Hart Building boasted a contemporary, energy-efficient design that could accommodate a growing number of staff members and technological innovations. The building’s centerpiece was a towering, asymmetrical 90-foot-high atrium whose skylight brightened corridors and offices.

While the building was under construction, a panel of curators was charged with identifying potential sculptors and establishing criteria for the commission of a contemporary work to enliven the atrium. Alexander Calder and four other artists were invited to submit proposals. Calder was approached through his dealer, Klaus Perls, on July 29, 1975, just after his 77th birthday. A sketch and a model for Mountains and Clouds were submitted by November, and in April 1976 Calder’s innovative design was accepted.

On November 10, 1976, Calder brought the Mountains and Clouds maquette–-his 20-inch sheet-metal model–-to Washington, D.C., so that he could present it to the architect of the Capitol and finalize the placement of the piece. After making minor adjustments to two of the clouds, he expressed satisfaction with the maquette as positioned in a model of the atrium. This proved to be a final visit: Calder died of a heart attack that night after he returned to New York City. Despite his death, the approval of the maquette and the siting of the work meant that fabrication of the full-sized sculpture could proceed. But in 1979 fabrication was delayed–-and nearly terminated–-when public funds for the sculpture were eliminated from the costly construction budget for the Hart Building.

Financial assistance materialized in 1982 through Senator Nicholas Brady, who believed the Calder sculpture to be “the right work for the right place at the right time.” [1] As New Jersey’s senator for eight months–-appointed to a vacancy pending election of a successor–-Brady wished to present a gift to the Senate on his departure and so offered to raise the needed funds. Together with art collector and philanthropist Paul Mellon and former Treasury Secretary C. Douglas Dillon, Brady formed the Capitol Art Foundation, which accomplished the task. The Calder sculpture was installed in the atrium of the Hart Building in 1986.

Because the interior of the atrium presents a complex background of doors, windows, balconies, and stairwells capped by a coffered ceiling, Calder stressed simplicity in the design of the sculpture. Similarly, because of the polished white marble that dominates the space, he decided on a matte black surface for the entire piece. The mountains–-the stabile–-are made up of four flat, angular steel plates with five mountain peaks among them, and two archlike legs, one branching off the other. The clouds–-the mobile–-consist of four overlapping, curvilinear aluminum plates. In the absence of any air source to propel them, they are turned by a computer-controlled motor, which generates random patterns. Shortly after their installation, the clouds ceased to move when a mechanical problem with the design of the main bearing prevented the motor-driven shaft from turning the clouds. After an exhaustive inspection of the bearing system, the office of the Senate superintendent awarded a contract in October 2001 for the redesign and manufacture of a new bearing system that will again set the clouds in motion.

The placement of Mountains and Clouds makes the sculpture part of the entire irregularly shaped public space of the building, not just part of the east atrium. Calder’s genius in positioning it as he did led to the work’s great success. The atrium is directly entered from the east doors to the building. As one passes through a low lobby, only a section of the black steel sheets of the mountains appears, perceived as a virtually flat surface. The whole complex composition becomes apparent only when one reaches the junction of lobby and atrium. Suddenly, the full height of the atrium and the sculpture astonishes the viewer. Had the enormous work been centered in the atrium, it might have produced an overwhelming sense of oppression or confinement. But by locating the nearest portion of the stabile some 40 feet from the atrium’s east wall, Calder allowed viewers the necessary space and distance to take in the whole work.

The sculpture extends into the large north-south corridor (as tall as the atrium) that continues through the entire building. Most visitors probably experience the sculpture first from that corridor. They may notice it immediately on entering either the north or south doors, when one of the arch-shaped legs of the mountains appears to step out from the atrium into the corridor, or one of the clouds enters or leaves the corridor’s air space. Approaching Mountains and Clouds from the south entrance gives a different impression; one initially sees only two mountain peaks, and the highest seems to touch or merge into the lowest cloud form. From this perspective, it is the mountain-cloud unit that impresses.

Perhaps the most satisfying view is from the north. The work presents an open, more fully readable composition of two or three peaks with legs, and clouds that seem to float in front of the mountains. There is a large circle cut through one of the mountain sheets, offering, from this view, needed relief from the massive stabile. The arch-shaped legs are reminiscent of flying buttresses and, like flying buttresses, they provide both support and aesthetic pleasure.

The walls of the atrium in which Calder’s mountains stand are pierced on many levels by balconies, windows, and walkways. Thus, the mountains may be climbed, in a sense, and each stage of the ascent offers different views–-indeed, different understandings–-of the mountains and the clouds. As in actual mountain climbing, the distant clouds gradually become looming clouds during the ascent, until eventually the climber stands above them.

Calder in his early years was famous for his Circus, in which his playful inventiveness found fulfillment in toy-sized sculptures. In his later years, his sculpture often seemed to aspire to the monumental condition of architecture. Throughout his life, he made sculptural equivalents of fish and whales and prehistoric animals, of birds and starry constellations. Mountains and Clouds is his grand final statement of elemental themes expressed in a powerful, space-transforming invention.



1. Francis X. Clines, “Awaiting the Vista of a Calder,” New York Times, 18 November 1985.

 

More on Mountains and Clouds
 

Mountains and Clouds, the focal point of the nine-story atrium of the Hart Senate Office Building, is the largest and most modern sculpture in the Senate. The massive, black construction, designed by Alexander Calder in 1976, features rotating clouds suspended above stationary mountains. The entire composition creates a bold contrast to the white marble of the surrounding interior walls.

Calder developed two sculptural forms in the 1930s: the "mobile" and the "stabile." The mobile–-the suspended, multipart, freely moving sculpture–-is recognized in art history as one of the most significant formal innovations of 20th-century sculpture. The stabile–-its fixed, freestanding counterpart–-evolved in Calder's later work into ever-larger, nearly architectural forms, often spanning space as well as occupying it. Although Calder would sometimes mount a mobile on a stabile, Mountains and Clouds, his last sculptural project, is his only work that combines a separate mobile and stabile.

The mobile component of Mountains and Clouds consists of four clouds hung at varying heights, providing a range of perspectives when viewed from each floor of the building. Weighing more than two tons, the honeycomb aluminum-core clouds, with a thin aluminum skin, span 75 feet. The largest cloud stretches 42 1/2 feet across. The mechanically driven clouds, fabricated by Crystallization Systems, Inc., of Long Island, New York, are suspended by a single shaft from the ceiling of the Hart Building.

The stabile component of Mountains and Clouds–-the mountains–-is made of sheet metal. It reaches a height of 51 feet and weighs 36 tons. The stabile was fabricated by Segre Iron Works of Waterbury, Connecticut, a company that had produced many of Calder's large outdoor pieces.

 
 
  

Senate Art

Explore the Senate's Art with the Office of the Senate Curator.


E-mail a Senate curator

Have questions about Senate art?  Email the curator.

Go

Capitol Virtual Tour

Can't make it to Washington to see the Capitol for yourself?  Take a look inside with our 360 degree virtual tour!  (This action will take you outside of www.senate.gov)

Go